SANWA DENKI Pressure Switch SPS-8TK-A, ON/0.05MPa, OFF/0.03MPa, Rc1/4, ZDC2 |
฿ไม่ระบุ |
รายละเอียดสินค้า
SANWA DENKI Pressure Switch
Model : SPS-8TK-A
ON/0.05MPa, OFF/0.03MPa, Rc1/4, ZDC2
- Category : Mass-produced model. Specifically Developed for Hot Water Supply System.
- Sensing Part : Stainless Steel Coupled Bellows
- Upper Limit Adjustment Pressure Range : 0.027 ~ 0.17 MPa
- Differential Pressure : 0.02 ~ 0.07 MPa
- Setting Accuracy : +,-0.005 MPa
- Proof Pressure : 0.6 MPa
- Standard Pressure Setting : ON/0.05 MPa, OFF/0.03 MPa
- Fluid : Hot Water
- Rated Power : AC250V 5A, DC100V 1A, AC125V 10A, DC24V 5A
- Port Size : Rc1/4 (Internal Taper Pipe Thread)
- Body / Seal Material (Standard Materials) : Zinc Alloy Die-Cast (ZDC2) / NBR
- Enclosure Material : Zinc Alloy Die-Casting
- Switch Body Material : Phenol Resin
- Spring Material : SUS304
- Contact Material : Silver (Standard)
- Lead Wire Length : 0.75cm2 x 200mm
- Weight : 220g
Mfg. SANWA ELECTRIC CO., LTD.
Made In Japan
Model : SPS-8TK-A
ON/0.05MPa, OFF/0.03MPa, Rc1/4, ZDC2
- Category : Mass-produced model. Specifically Developed for Hot Water Supply System.
- Sensing Part : Stainless Steel Coupled Bellows
- Upper Limit Adjustment Pressure Range : 0.027 ~ 0.17 MPa
- Differential Pressure : 0.02 ~ 0.07 MPa
- Setting Accuracy : +,-0.005 MPa
- Proof Pressure : 0.6 MPa
- Standard Pressure Setting : ON/0.05 MPa, OFF/0.03 MPa
- Fluid : Hot Water
- Rated Power : AC250V 5A, DC100V 1A, AC125V 10A, DC24V 5A
- Port Size : Rc1/4 (Internal Taper Pipe Thread)
- Body / Seal Material (Standard Materials) : Zinc Alloy Die-Cast (ZDC2) / NBR
- Enclosure Material : Zinc Alloy Die-Casting
- Switch Body Material : Phenol Resin
- Spring Material : SUS304
- Contact Material : Silver (Standard)
- Lead Wire Length : 0.75cm2 x 200mm
- Weight : 220g
Mfg. SANWA ELECTRIC CO., LTD.
Made In Japan
