WATANABE Load Cell Meter ASG-158-13-14 |
฿ไม่ระบุ |
รายละเอียดสินค้า
WATANABE Load Cell Meter
Model : ASG-158-13-14
ASG-158 : Load Cell (Strain Gauge) Digital Panel Meter ASG-158 Series
-
1 : Power Supply, AC90 to 110V
3 : Data Output, BCD (TTL)
-
1 : Comparative Output, Relay
4 : Sensor Power Supply, 10V
Common Specification :-
Memory Backup : Keep the Setup Data for About 10 Years at EEPROM
Operating Temperature and Humidity Range : 0 to 50C, 35 to 85% RH (Non-condensing)
Storage Temperature and Humidity Range : -10 to 70C, Less than 60% RH
Power Supply : AC 90 to 110 V+,-10% (50/60Hz)
Power Consumption : Approx. 7VA (at 100 V)
External Dimensions : 96 mm (W) x 48 mm (H) X 144 mm (D), DIN Size
Weight : Approx. 550 g
General Specifications :-
Measurement Part :-
Operating Method : Sequential Comparison Method
Accuracy : +,-(0.15% of FS+ 1 Digit) (23C+,-5C)
Sampling Speed : 2000 times / Second
Display : 7 Segment LED, Character Height 14.2mm (RED), Comparative Setup Display Part Height 8mm (Green)
Temperature Characteristic : +,-(0.005% of org + 0.5 Digit)/C
Polarity Display : Display "-" at Setting Calculation Result "negative"
Over range alarm : o.L. or -o.L. Display with regards to the input signal
more than display range
Zero Display : Leading Zero Suppress
Monitor Display : Peak Hold (PH), Digital Zero (DZ), Digital Zero Bakcup (ME)
Applicable Sensor : Strain Gauge Method Each Type Sensor (350 Ohm)
Sensor Power Supply : DC10V +,-10% 30mA
Zero Adjustment Range : -3~+2mV/V
Gain Adjustment Range : 1.0~3.0mV/V
Minimum Input Sensitivity : 1.0?V/Digit
Maximum Input Voltage : 3.0mV/V
Maximum Display : 9999 (Full 4 Digit)
Decimal Point : Configurable at the arbitrary position (Switch must be done by Key Switch)
Mfg. : WATANABE ELECTRIC INDUSTRY CO., LTD.
Made in Japan
Model : ASG-158-13-14
ASG-158 : Load Cell (Strain Gauge) Digital Panel Meter ASG-158 Series
-
1 : Power Supply, AC90 to 110V
3 : Data Output, BCD (TTL)
-
1 : Comparative Output, Relay
4 : Sensor Power Supply, 10V
Common Specification :-
Memory Backup : Keep the Setup Data for About 10 Years at EEPROM
Operating Temperature and Humidity Range : 0 to 50C, 35 to 85% RH (Non-condensing)
Storage Temperature and Humidity Range : -10 to 70C, Less than 60% RH
Power Supply : AC 90 to 110 V+,-10% (50/60Hz)
Power Consumption : Approx. 7VA (at 100 V)
External Dimensions : 96 mm (W) x 48 mm (H) X 144 mm (D), DIN Size
Weight : Approx. 550 g
General Specifications :-
Measurement Part :-
Operating Method : Sequential Comparison Method
Accuracy : +,-(0.15% of FS+ 1 Digit) (23C+,-5C)
Sampling Speed : 2000 times / Second
Display : 7 Segment LED, Character Height 14.2mm (RED), Comparative Setup Display Part Height 8mm (Green)
Temperature Characteristic : +,-(0.005% of org + 0.5 Digit)/C
Polarity Display : Display "-" at Setting Calculation Result "negative"
Over range alarm : o.L. or -o.L. Display with regards to the input signal
more than display range
Zero Display : Leading Zero Suppress
Monitor Display : Peak Hold (PH), Digital Zero (DZ), Digital Zero Bakcup (ME)
Applicable Sensor : Strain Gauge Method Each Type Sensor (350 Ohm)
Sensor Power Supply : DC10V +,-10% 30mA
Zero Adjustment Range : -3~+2mV/V
Gain Adjustment Range : 1.0~3.0mV/V
Minimum Input Sensitivity : 1.0?V/Digit
Maximum Input Voltage : 3.0mV/V
Maximum Display : 9999 (Full 4 Digit)
Decimal Point : Configurable at the arbitrary position (Switch must be done by Key Switch)
Mfg. : WATANABE ELECTRIC INDUSTRY CO., LTD.
Made in Japan
