SANWA DENKI Pressure Switch SPS-5A-A (ON/0.4 kPa, OFF/0.8 kPa) |
฿ไม่ระบุ |
รายละเอียดสินค้า
SANWA DENKI Pressure Switch
Model : SPS-5A-A
ON/0.4kPa, OFF/0.8kPa, Rc3/8, ZDC2
- Category : Low Pressure Switch
- Sensing Part : Rubber Diaphragm (NBR)
- Lower Limit Adjustable Set Point Range : 0.1 ~ 1 kPa
- Differential Pressure : 0.2 ~ 0.7 kPa
- Setting Accuracy : +,-0.05 kPa
- Proof Pressure : 100 kPa
- Standard Set Point : ON/0.4 kPa, OFF/0.8 kPa
- Media :
- Operating Temperature : -20 to +60 C
- Rated Power : AC250V 2.5A, AC125V 5A, DC100V 0.5A, DC24V 2.5A
- Port Size : Rc3/8 (Internal Taper Pipe Thread), G3/8 (Internal Parallel Pipe Thread)
- Body / Seal Material (Standard Materials) : Zinc Alloy Die-Cast (ZDC2) / NBR
- The Enclosure (IP54) is Gasketed Die-Cast Aluminum Water Proof Construction.
- Switch Body Material : Phenol Resin
- Spring Material : SUS304
- Contact Material : Silver (Standard), 3 Micron Gold Plating
- Lead Wire Length : 0.75cm2 x 200mm
Mfg. SANWA ELECTRIC CO., LTD.
Made In Japan
Model : SPS-5A-A
ON/0.4kPa, OFF/0.8kPa, Rc3/8, ZDC2
- Category : Low Pressure Switch
- Sensing Part : Rubber Diaphragm (NBR)
- Lower Limit Adjustable Set Point Range : 0.1 ~ 1 kPa
- Differential Pressure : 0.2 ~ 0.7 kPa
- Setting Accuracy : +,-0.05 kPa
- Proof Pressure : 100 kPa
- Standard Set Point : ON/0.4 kPa, OFF/0.8 kPa
- Media :
- Operating Temperature : -20 to +60 C
- Rated Power : AC250V 2.5A, AC125V 5A, DC100V 0.5A, DC24V 2.5A
- Port Size : Rc3/8 (Internal Taper Pipe Thread), G3/8 (Internal Parallel Pipe Thread)
- Body / Seal Material (Standard Materials) : Zinc Alloy Die-Cast (ZDC2) / NBR
- The Enclosure (IP54) is Gasketed Die-Cast Aluminum Water Proof Construction.
- Switch Body Material : Phenol Resin
- Spring Material : SUS304
- Contact Material : Silver (Standard), 3 Micron Gold Plating
- Lead Wire Length : 0.75cm2 x 200mm
Mfg. SANWA ELECTRIC CO., LTD.
Made In Japan
